Extruder Puffed snacks food is a very wide range of food consumption, because of the double screw compatibility for the material, the extruder using rice, corn, wheat, oats, flour and other grain as raw materials. The double screw extrusion machine could through different die extrusion, rotary...
Puffed snacks food is a very wide range of food consumption, because of the double screw compatibility for the material, the extruder using rice, corn, wheat, oats, flour and other grain as raw materials. The double screw extrusion machine could through different die extrusion, rotary cutting forming, after that customer could through baked, Fried, seasoning to get crispy, appearance to the life leisure small food of various kinds of flavors.
Suitable for wide range of raw materials: rice, corn, brown rice, flour and other powder.
Technical advantages of twin screw extruder:
1. The raw material adaptability, can adapt to high viscosity, low viscosity, high oil content, high moisture or thick, more oil, very wet and the other in a single screw would not bite (SSE) in raw material processing.
2. The grain size limit of raw materials is less, which can be used for processing of raw materials with wide particle size or the raw material of coarse powder and single screw processing.
3. The material flow is more uniform inside the cylinder, which can be more accurately proportioned in the process of adding steam, water and other auxiliary processing to achieve the actual demand effect. 4. The inner and exterior quality is better, can achieve very good homogeneous state and makes the material molecular structure configuration even and smooth surface in the process of extrude mold, product particle uniformity, good uniformity.
5. The homogenizing effect is better, and the curing degree of starch can be up to 95%, so that the processed aquatic feed can maintain stability in water and the product nutrients are not lost and easy to digest and absorb.
6. Under the same power output is higher, the good performance of hybrid heat in a timely manner for material homogenizing, sped up the material aging degree, reduce the material temperature fluctuations, increase the output of the extrusion product.
7. The product diversity and adaptability are wider, which can be used to process the products of fine particle aquatic feed, high oil formulation, high moisture content, high adhesion product and multi-color, sandwich type and special shape.
8. The process operation is more convenient, and the spindle speed can be adjusted according to the demand of the processing product. Since the self-cleaning characteristics, it is convenient to clean, and no dismantling equipment is required after each processing.
9. Wear parts, lighter, often a wrong idea that single screw wear less, actually in the process of twin screw extrusion due to the stability of the materials flow and material flow characteristics, determine the material of screw and barrel inner sleeve wear smaller than single screw, although screw number over a set of more, but the spare parts cost is still lower than single screw.
10. The production cost is lower, because of the double screw machine has good operating stability and the boot in the process of feed processing fee less material, less waste water, fewer partners, high heat transfer efficiency, high yield, high degree electricity production index, add spare parts cost is low, its final production costs relative to the single screw is far lower.
The elevation and cost of accessories are also low, and the final production cost is much lower than the single screw.